Site Preparation
SMEMA Communication
The communication interface between adjacent machines is provided by a
SMEMA- compliant protocol, allowing the Medalist i3070 Series 5i to
integrate directly into printed circuit assembly manufacturing process.
14 way AMP sockets are provided at the rear of the system to connect to
the upstream and downstream systems.
Figure 10 SMEMA Connectors
Use 5- wire SMEMA connections to the upstream and downstream systems.
In
output modules.
14
Rear View
Figure
11, the numbers are the signals associated with PLC input or
Downstream
Upstream
Medalist i3070 Series 5i System Installation