Perform Engine Maintenance - Deutz Models; Perform Engine Maintenance - Ford Models - Genie S-40 Service Manual

January 2005
REV A
B-19
Perform Engine Maintenance -
Deutz Models
Engine specifications require that
this procedure be performed every
400 hours.
Required maintenance procedures and additional
engine information are available in the
Deutz FL 2011 Operation Manual
(Deutz part number 0297-9929).
Deutz FL 2011 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
Part No. 102521
Section 3 • Scheduled Maintenance Procedures
B-20
Perform Engine Maintenance -
Ford Models
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG 425 EFI Operator Handbook
84794 Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Genie S-40 and Genie S-45
CHECKLIST B PROCEDURES
Engine specifications require that
this procedure be performed every
400 hours.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
84792
3 - 33