Hydraulic Specifications - Genie S-40 Service Manual

Section 2 • Specifications
SPECIFICATIONS
Performance Specifications
All Models
Drive speeds, maximum
Drive speed, stowed
Gasoline/LPG models
Drive speed, stowed
Deutz Diesel models
Drive speed,
raised or extended
- all models
Gradeability (boom stowed)
Rough terrain
Boom function speeds, maximum
from platform controls
Boom up
Boom down
Boom extend
Boom retract
Turntable rotate, 360°
boom fully stowed
Platform rotate, 160°
Platform level up
Platform level down
Jib boom up, S-45 models
Jib boom down, S-45 models
Braking distance, maximum
High range on paved surface
2 - 2
2WD
4 mph 3.5 mph
6.4 km/h 5.6 km/h
40 ft/6.8 sec 40 ft/7.8 sec
12.2 m/6.8 sec 12.2 m/7.8 sec
3.5 mph 3 mph
5.6 km/h 4.8 km/h
40 ft/7.8 sec 40 ft/9.1 sec
12.2 m/7.8 sec 12.2 m/9.1 sec
0.6 mph 0.6 mph
1 km/h 1 km/h
40 ft/40 sec 40 ft/40 sec
12.2 m/40 sec 12.2 m/40 sec
2WD
30%
40 to 60 seconds
50 to 80 seconds
30 to 60 seconds
25 to 55 seconds
70 to 110 seconds
6 to 20 seconds
25 to 50 seconds
15 to 35 seconds
35 to 45 seconds
20 to 30 seconds
3 to 4 ft
0.9 to 1.2 m
Genie S-40 and S-45

Hydraulic Specifications

Hydraulic Oil Specifications
4WD
Hydraulic oil type
Approximate SAE grade
Viscosity index rating
Chevron Rykon MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and have a minimum viscosity index
rating of 150. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
4WD
40%
Fire resistant
Mineral based
January 2005
Chevron Rykon MV equivalent
Petro Canada Premium ECO 46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Genie specifications require
additional equipment and special
installation instructions for the
approved optional fluids. Consult
the Genie Industries Service
Department before use.
Part No. 102521
REV A
5W-20
200