Perform Engine Maintenance - Perkins Models; Perform Engine Maintenance Ford Models - Genie S-40 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST C PROCEDURES
C-4
Perform Engine Maintenance -
Perkins Models
Engine specifications require that
this procedure be performed every
600 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Perkins 404C-22 Operation Manual
(Perkins part number TPD 1443S).
Perkins 404C-22 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
3 - 38
C-5
Perform Engine Maintenance -
Ford Models
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG 425 EFI Operator Handbook
94890 Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Genie S-40 and Genie S-45
January 2005
Engine specifications require that
this procedure be performed every
800 hours.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
Part No. 102521
REV A
84792