Perform Engine Maintenance - Perkins Models; Drain The Fuel Filter/Water Separator - Diesel Models - Genie S-40 Service Manual

January 2005
REV A
A-5
Perform Engine Maintenance -
Perkins Models
Engine specifications require that
this procedure be performed daily
or every 8 hours, whichever comes
first.
Required maintenance procedures and additional
engine information are available in the
Perkins 404C-22 Operation Manual
(Perkins part number TPD 1443S).
Perkins 404C-22 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
Part No. 102521
Section 3 • Scheduled Maintenance Procedures
A-6
Drain the Fuel Filter/ Water
Separator - Diesel Models
Proper maintenance of the fuel filter/water separator
is essential for good engine performance. Failure to
perform this procedure can lead to poor engine
performance and component damage.
94890
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Genie S-40 and Genie S-45
CHECKLIST A PROCEDURES
Genie specifications require that
this procedure be performed every
40 hours or weekly, whichever
comes first.
Explosion and fire hazard. Engine
fuels are combustible. Perform this
procedure in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an approved
fire extinguisher within easy reach.
Perform this procedure with the
engine off.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
3 - 9