Check The Oil Cooler And Cooling Fins - Deutz Models - Genie S-40 Service Manual

January 2005
REV A
B-5
Check the Oil Cooler and
Cooling Fins - Deutz Models
Maintaining the oil cooler in good condition is
essential for good engine performance. Operating a
machine with a damaged oil cooler may result in
engine damage. Also, restricting air flow through
the oil cooler will affect the performance of the
cooling system.
Bodily injury hazard. Do not
inspect while the engine
is running. Remove the key to
secure from operation.
Burn hazard. Beware of hot engine
components. Contact with hot
engine components may result in
severe burns.
Oil cooler
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
2 Remove the fasteners from the engine side
cover, then remove the cover.
Part No. 102521
Section 3 • Scheduled Maintenance Procedures
3 Inspect the oil cooler for leaks and physical
damage.
4 Clean the oil cooler of debris and foreign
material.
Cooling and fan blower fins
5 Inspect the fan blower fins for physical damage.
6 Clean the fan blower fins of debris and foreign
material.
7 Inspect the head cooling passages and fins for
physical damage or foreign material, using a
flashlight.
8 Clean the cylinder head cooling passages of
debris and foreign material.
9 Install the engine side cover.
10 Swing the engine back to its original position
and install the engine pivot plate retaining
fasteners.
Genie S-40 and Genie S-45
CHECKLIST B PROCEDURES
a b c
a oil cooler
b cylinder head cooling fins
c fan blower fins
Crushing hazard. Failure to install
the fasteners into the engine tray
to secure it from moving could
result in death or serious injury.
3 - 21