Perform Engine Maintenance - Perkins Models - Genie S-40 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
B-21
Perform Engine Maintenance -
Perkins Models
Engine specifications require that
this procedure be performed every
400 hours.
Required maintenance procedures and additional
engine information are available in the
Perkins 404C-22 Operation Manual
(Perkins part number TPD 1443S).
Perkins 404C-22 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fasteners
located under the engine tray. Swing the engine
tray out and away from the machine and secure
it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
3 - 34
94890
Genie S-40 and Genie S-45
January 2005
REV A
Part No. 102521