Creating Page Zones - Nortel Enterprise Edge 2.0 Manual

60 Communicating in the office

Creating page zones

You can assign one of six zones for receiving pages to each telephone.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge 2.0 Programming Operations Guide.
You can make a telephone part of a page zone when the telephone has paging set to
Y (Yes).
A zone is any set of Enterprise Edge telephones that you want to group together for
paging, regardless of their location. The maximum number of sets in a page zone is
50.
Your installer programs if a tone sounds before a page begins, and the maximum
number of seconds a page can last before it automatically turns off.
Displays
Enter zone:___
ALL
Invalid zone
Page choice:
SETS SPKR BOTH
Page timeout
Paging ALL
Paging busy
For other displays, see
Enterprise Edge 2.0 Feature Programming Telephone Guide
Tip
Page zone do not include Hunt Group DNs. For more information about Hunt
Groups see Hunt Groups on page 81.
Tip
Make sure that everyone who needs to make page announcements has a list
showing which telephones are in what page zones.
Enter the required page zone number (0- 6) or press
You have entered a page zone code that is not between 0 and 6.
Select the type of page you want. See the list in
announcement on page 59.
The time allocated for paging has expired.
You are making a page. The display shows the page zone you have
Ä
selected. Press
A page is being made in the page zone you have requested.
Common feature displays
Making a page
or Release when finished.
on page 121.
ALL
.
P0911589 Issue 03