Creating A Home Node - Nortel CallPilot 100 Administration Manual

74 Chapter 7 Working with CCR Trees

Creating a Home node

Begin to build a CCR Tree by creating a Home node. Create a Home menu node if you want to
give callers a list of options. Create an Information message Home node if you want callers to
disconnect after they hear the Information message.
To create a Home node
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY
New tree: x
BUILD
0 Home/Menu
REC OTHR
Rec pri prompt:
RETRY
Accept prompt?
RETRY PLAY
Path:
RETRY END
Tree: x
SAVE PRINT
Save as tree x
YES OTHR
Tree saved
CCR Admin
ADMIN
N0025636 02
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
Press OTHR.
2
OTHR
Press CCR.
3
Press ADMIN.
4
Enter a Tree number from 1 to 8 and press OK.
5
OK
Press BUILD.
6
QUIT
Pick up the handset and press REC.
7
OK
8 At the tone, record your Home Menu or Information message and
OK
press OK to end the recording.
Do not replace the handset.
If you want to listen your recording, press PLAY
9
OK
or
if you want to accept your recording, press OK.
10 Press END.
OK
11 Press SAVE.
QUIT
12 Press YES.
QUIT
13 This display appears briefly.
14 Press ® to end the session.