Line Redirection; Turning On Line Redirection - Nortel Enterprise Edge 2.0 Manual

54 Forwarding your calls
Displays
Forward denied
Forward>221
CANCL
Not in service
For other displays, see

Line Redirection

Line Redirection allows you to send your external calls to a telephone outside the
office. You can decide to redirect all your external lines or only some.
Line Redirection takes priority over the Call Forward feature. If both features are
active on a set, incoming external calls on redirected lines route to the indicated
Selective Line Redirection (SLR) external destination. Incoming internal calls
forward to the indicated Call Forward destination.
You cannot use the Line Redirection feature on either a M7100 telephone or a
telephone connected to an Enterprise Edge ATA2 or an Enterprise Edge ASM.

Turning on Line Redirection

Ä¡Ý
Ä¡Ý
1. Press
2. Select the outgoing line to use for redirected calls.
3. Enter the number you need to redirect call to. To enter the telephone number
to which you want to redirect calls, use one of the following methods:
• Press an external autodial button.
• Enter an external telephone number (using no more than 24 digits) then
ú
press
ú
• Press
private network line that does not require you to dial digits.
4. Select the lines to redirect.
ALL
If you use to redirect all your lines, ensure that you wait until all the lines on
your telephone light up before pressing
before all the lines light up, those lines not lit are not redirected.
Enterprise Edge 2.0 Feature Programming Telephone Guide
There are several reasons why you can get this
message. For example, you cannot forward your calls
to a telephone that has Call Forward programmed to
your telephone.
Your calls are being forwarded to telephone 221.
Two or more telephones are linked in a forwarding
chain, and one is out of service or used for
programming.
Common feature displays on page 121.
.
OK
or .
OK
or if the line you have selected as the outgoing line is a
ú OK ú
or . If you press
P0911589 Issue 03
OK
or