Testing The Telephone Headset; Enterprise Edge 2.0 Feature Programming Telephone Guide; Testing The Telephone Speaker; Testing The Power Supply To A Telephone - Nortel Enterprise Edge 2.0 Manual

Testing the telephone headset

The headset test is not available to telephones that do not have a headset jack or a
headset connected.
Ä¡âÞ
1. Press
TEST
2. Press or
through the headset. The volume is reset to a default level during the test.
Press any button to end the test.

Testing the telephone speaker

Ä¡âÞ
1. Press
TEST
2. Press or
You can hear page tone through the telephone speaker at the maximum volume. The
volume returns to its previous setting when you end the test.
Press any button to end the test.

Testing the power supply to a telephone

Ä¡âÞ
1. Press
TEST
2. Press or
You can see all the indicators on the telephone go on and hear ringing at maximum
volume. When the test ends, the display shows
The test continues for five seconds or until you press a button.
P0911589 Issue 03
£
, then or
ú
to go ahead with a headset test. You can hear dial tone
£
, then or
ú
to go ahead with a speaker test.
£
, then or
ú
to go ahead with a power supply test.

Enterprise Edge 2.0 Feature Programming Telephone Guide

NEXT
until the display reads
NEXT
until the display reads
NEXT
until the display reads
Power OK
.
Troubleshooting 119
Headset test
.
Speaker test
.
Power test
.