General System Features; Pulse Or Tone Dialing; Disconnect Supervision; Hunt Groups - Nortel Enterprise Edge 2.0 Manual

General System features

The following features are available for the all the Enterprise Edge system.

Pulse or tone dialing

If your external lines use pulse dialing, you can switch temporarily to tone dialing.
Tone dialing allows you to communicate with devices such as answering machines,
to access the features that PBX systems can provide, or to use another Enterprise
Edge system remotely.
£
Press while on an active line. After you hang up, your telephone returns to pulse
dialing.

Disconnect supervision

When Disconnect Supervision is assigned to a line, the Enterprise Edge system
detects when an external caller hangs up and releases the line for other uses. The
installer assigns disconnect supervision.

Hunt Groups

Your Enterprise Edge system allows you to establish Hunt Groups in your system.
Hunt Groups are a group of Enterprise Edge sets that accessible by a single
directory number. The Hunt Groups feature ensures calls route to the appropriate
people. For more information about Hunt Groups see

Internal numbers

Each telephone in the Enterprise Edge system has its internal number. The length
of internal numbers in your system can be from two to seven digits. All numbers in
your system are the same length. Your installer sets the length of internal numbers
(called the DN length). The default DN length is three.
To find out your internal number, use the Button Inquiry feature (
on an intercom button. On the M7100 telephone, Button Inquiry shows your
internal number followed by the function assigned to your single-memory button.

Line assignment

You can assign any of the lines in your system to any of your telephones. Your
installer assigns lines to telephones. Settings for lines assigned are: appear only,
appear and ring, or ring only.
P0911589 Issue 03 Enterprise Edge 2.0 Feature Programming Telephone Guide
14
Hunt Groups on page 81.
Ä¥â
)