Changing How You Dial Your Calls; Using Standard Dial; Using Automatic Dial; Using Pre-Dial - Nortel Enterprise Edge 2.0 Manual

34 Making calls

Changing how you dial your calls

Ä¥¡Û
Ä¥¡Û
1. Press
£
2. Press or
ú
3. Press
You cannot program the dialing modes feature code on a memory button.

Using Standard dial

Standard dial allows you to make a call by selecting a line and dialing the number.
If you have a prime line, it is selected automatically when you lift the receiver or
©
press
You cannot use Standard dial on a M7100 telephone unless you pick up the receiver
first. If you have a M7100 telephone, use the Automatic dial or Pre-dial feature for
on-hook dialing.

Using Automatic dial

Automatic dial allows you to dial a number without selecting a line. Your prime line
is selected when you start dialing a number.
Automatic dial does not work if your telephone has no prime line or if your prime
line is in use.
Telephones connected to an Enterprise Edge Analog Terminal Adaptor (ATA2) or
an Enterprise Edge Analog Station Module (ASM) cannot use Automatic dial.

Using Pre-dial

Pre-dial allows you to enter a telephone number, check it, then change it before
making the call. The call does not dial until you select a line or line pool, or pick up
the receiver. You can pre-dial both external and internal numbers. You must,
however, select the correct type of line (external or internal) for the type of number
you have entered.
Enterprise Edge 2.0 Feature Programming Telephone Guide
.
NEXT
until the dialing mode you want appears.
OK
or to select the displayed dialing mode.
.
Tip
If your telephone starts ringing while you are pre-dialing a number, you can
stop the ringing by turning on Do Not Disturb (Ä¡Þ). Do Not
Disturb entered while dialing does not affect the numbers you are entering.
You cannot pre-dial a telephone number if all the lines on your telephone are
busy.
P0911589 Issue 03