Changing Handsfree For A Telephone; Handsfree Answerback - Nortel Enterprise Edge 2.0 Manual

28 Answering calls
To prevent a possible echo, keep the area around your telephone free of paper and
other objects that can screen your microphone. Turn down the microphone's
volume (press the left end of
echoes. When you change the volume level, both the microphone and speaker
volume adjust to prevent feedback problems.
Place the telephone so that any unavoidable local noise (such as an air conditioner)
is behind it. This position limits the amount of background noise.

Changing Handsfree for a telephone

You can program the type of Handsfree used with each telephone or activate

Handsfree Answerback.

You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge 2.0 Programming Operations Guide.
There are three ways to set Handsfree for a telephone:
Displays
Handsfree:None
CHANGE
Handsfree:Auto
CHANGE
Handsfree:Std
CHANGE
For other displays, see
Both Auto and standard Handsfree allow you to use a headset with an Enterprise
Edge telephone.
A Handsfree/Mute button is automatically assigned to a telephone programmed
with Handsfree and always located in the lower right-hand corner of the telephone.
Handsfree Answerback
Handsfree Answerback allows you to answer a voice call without lifting the
receiver. Handsfree Answerback is always turned off for a M7100 telephone.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Ã
Tip
In open office environments, use the receiver when handsfree communication
is not necessary or when you need privacy during a call. Another option is to
use a headset.
Handsfree is not available to the telephone.
You can make or answer a call without having to
pick up the receiver or press
telephone's internal microphone and speaker turn
on automatically when you press a line or
intercom button to make or answer a call.
A standard version of Handsfree described
Handsfree/Mute on page 26.
Common feature displays
Ã
or while speaking) to prevent
©
. The
Using
on page 121.
P0911589 Issue 03