Choosing A Line Using A Line Button - Nortel Enterprise Edge 2.0 Manual

Feature programming telephone guide
Hide thumbs Also See for Enterprise Edge 2.0:
Table of Contents

Advertisement

32 Making calls
Hidden number
Line denied
Line061
TRANSFER
No last number
No line selected
Not in service
On another call
LATER
Restricted call
Ring Again?
YES
NO
Select a line
Send message?
YES
NO
Denied in Admin
For other displays, see

Choosing a line using a line button

You have one line button for each line assigned to your telephone. Press the line
button to select the line you want to answer or use to make a call. Having several
line buttons allows you immediate access to more than one line.
The M7100 telephone has two intercom paths used instead of line buttons to answer
and make calls. A M7100 can have two lines. You can press
between two calls, one active and one on hold.
Enterprise Edge 2.0 Feature Programming Telephone Guide
The last number you dialed or the number you saved
for Saved Number Redial was a speed dial number
that displayed a name instead of the number. The
number is dialed correctly, but is not visible.
You have tried to use another person's private line.
Enter the digits of the number you want to dial.
You have not dialed an external telephone number
since the last power interruption or system reset.
Either you have no prime line or your prime line is
busy. Select a line manually before dialing.
You have entered the number of a telephone that is not
in service.
The telephone you have called is on another call.
LATER
Press
to use the Ring Again or Message
features.
System programming has a restriction configured for
the call you are trying to make. A possible reason is
time-of-day restrictions for some calls.
YES
Press
to use Ring Again. Press
EXIT
message. See
Sending messages
Turning on Ring Again
Either you have no prime line, or the prime line is in
use, or the line programmed for an autodial number,
speed dial number, or Hotline is in use. Select a line
and dial again.
YES
Press
to send a message. See Messages.
The Last Number is not allowed.
Common feature displays
NO
to send a
on page 61 and
on page 36.
on page 121.
ú
to switch
P0911589 Issue 03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M7324M7310M7310nM7208M7324n

Table of Contents