Common Feature Displays - Nortel Enterprise Edge 2.0 Manual

Feature programming telephone guide
Hide thumbs Also See for Enterprise Edge 2.0:
Table of Contents

Advertisement

Common feature displays

You can see the following displays when you use a feature.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEWâ
OK
¤
239>221
221
TRANSFER
221 calling
Call 221?
YES
NO
Camped:
221
CALLBACK
P0911589 Issue 03
A person is using programming, or the feature you are trying to use
is not compatible with the configuration of the telephone or line.
You have tried to use a feature, but you do not have access to that
feature administration programming.
You have taken more than 15 seconds to press a button in response
to a display.
You have entered a feature code that used by an application
program that your system does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not available in the present
setup of your Enterprise Edge system.
You cannot use the feature you have selected because your
Using Set lock
telephone is locked. See
£
VIEWâ
Press
or press
or
ú
to fit on the display. Press
This indicates a long distance call. (May be available with Call
Display services.)
You are receiving an internal call from telephone 239 forwarded by
telephone 221 or you have an Answer button for telephone 221 and
an internal call from 239 is ringing on 221.
You are connected to an internal call. Press
the call.
You are receiving a call from telephone 221.
You have received a Ring Again offer for a call to an internal
telephone. Press the flashing internal line button or
number again. On the M7100 telephone, just lift the receiver.
NO
Otherwise, press
or wait 30 seconds for the Ring Again offer to
expire. For an explanation of Ring Again, see "Using Ring Again" on
page 36.
The person has not answered the camped call. The call has come
back to you. Press the line button or
call.
Enterprise Edge 2.0 Feature Programming Telephone Guide
on page 94.
áVIEW
to view a number that is too long
OK
or
when you finished.
TRANSFER
YES
CALLBACK
to reconnect to the
18
to transfer
to call the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M7324M7310M7310nM7208M7324n

Table of Contents