Creating Page Zones - Nortel M7410 Installation And Maintenance Manual

60 Communicating in the office

Creating page zones

Each telephone can be assigned to one of six zones for receiving pages.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge Programming Operations Guide.
You can make a telephone part of a page zone only if the telephone has paging set
to Y (Yes).
A zone is any set of Enterprise Edge telephones that you want to group together for
paging, regardless of their location. The maximum number of sets in a page zone is
50.
Your installer programs whether a tone sounds before a page begins, and the
maximum number of seconds a page can last before it is automatically turned off.
Displays
Enter zone:___
ALL
Invalid zone
Page choice:
SETS SPKR BOTH
Page timeout
Paging ALL
Paging busy
For other displays, see
Enterprise Edge Feature Programming Telephone Guide
Tip
Hunt Group DNs cannot be included in a page zone. For more information on
Hunt Groups see Hunt Groups
Tip
Make sure that everyone who needs to make page announcements has a list
showing which telephones are in which page zones.
Enter the desired page zone number (0- 6) or press
You have entered a page zone code that is not between 0 and 6.
Select the type of page you want. See the list in
announcement on page 59.
The time allotted for paging has expired.
You are making a page. The display shows the page zone you have
chosen. Press
ƒ
A page is already being made in the page zone you have requested.
Common feature displays
on page 83.
Making a page
or when you are finished.
®
on page 125.
ALL .
P0908510 Issue 02