Using Enterprise Edge Features - Nortel Enterprise Edge 2.0 Manual

114 Companion Features

Using Enterprise Edge features

It is possible to use many of the same Enterprise Edge features available to an
Enterprise Edge telephone on your portable telephone. The table below lists which
features are available for use on your portable telephone. For additional information
on features and the special key sequences required to use them, refer to the feature
card supplied with your portable telephone.
Table 3 Features supported by Enterprise Edge portable telephones
Feature
Call Forward
Call Information
Call Park
Call Park Retrieval
Cancel Call Forward
Conference
Directed Call Pickup
Group Pickup
Host system signaling
Line Pool
Mute
Page
Pause
Prime line
Privacy
Release
Speed Dial
Enterprise Edge 2.0 Feature Programming Telephone Guide
Tip
If you try to send a message from a desk telephone to a portable telephone, the
display of the desk telephone shows CanÕt send msg.
Description
Send calls to another telephone in your Enterprise Edge system. The
display does not indicate that calls are being forwarded.
Hunt Group calls override all Call Forward features. A Hunt Group DN
can be a Call Forward destination.
Display the name or extension of an internal caller. If your system is
equipped to receive CLASS information (Caller ID), the external caller
appears on the display.
On your portable, park a call.
On your portable, retrieve a parked call.
Cancel the Call Forward feature, where calls are automatically sent to
another telephone in your Enterprise Edge system.
See your Portable Telephone Feature Card .
Answer any telephone that is ringing in your Enterprise Edge system.
Answer a call ringing on another set in the same pickup group.
Link and pause are available. See "Using System features" on page 89
for more information.
On your portable, use line pools the same way a desk telephone does.
Prevent the person you are on the portable telephone with from
hearing you. Also, you can mute a portable's ringing for an incoming
call.
On your portable, page an individual telephone, several telephones,
external speakers, or the entire system.
A Hunt Group DN cannot be in a page zone.
Program in an external autodial sequence to insert a 1.5 second delay.
On your portable, may be either an Intercom Line, an Assigned Line or
a Line Pool.
In programming, change the privacy setting for an external line
assigned to the portable. This does not give the ability to change the
privacy setting on a call by call basis.
See your Portable Telephone Feature Card .
System speed dial codes only. No personal speed dial codes. The
portable has a directory that you can use to store up to 50 entries for
telephone numbers.
P0911589 Issue 03