26 Answering calls
Displays
3 parties only
Conference busy
Line001
221
TRANSFER
Press held line
For other displays, see
Listening to a call as a group
To allow people in your office to listen in on a call using Group Listening, press
Ä¡âÛ
You hear the caller's voice through your telephone's speaker. Continue to speak to
the caller through the telephone receiver. Your telephone's microphone is off, so
the caller does not hear people in your office.
Canceling Group Listening
Group Listening cancels automatically when you hang up or when you press
Ä£¡âÛ
Using Handsfree/Mute
You must set the ability to use Handsfree to on or off for each telephone. Also
program the type of Handsfree. See
28. You must also turn on Handsfree for a telephone to use a headset.
Answering calls without lifting the receiver
1. Press the line button for the ringing call.
©
2. Press
automatically turn on.
Enterprise Edge 2.0 Feature Programming Telephone Guide
You are trying to add a fourth party to your conference
call, or to join two conferences together. Release one
call from the conference before adding another, or
keep the two conferences separate.
You have tried to make a conference call, but your
system is handling its maximum number of conference
calls.
You are on a conference with the two lines or
telephones shown. You can drop out of the conference
and leave the other two parties connected
(Unsupervised Conference) by pressing
entering the Transfer feature code.
You have activated the Conference feature with one
call active and another on hold. Press the line of the
call on hold to bring that person into the conference.
Common feature displays
.
.
Tip
Keep the receiver away from the speaker, or you can hear feedback. The
higher the volume, the more the feedback. Press ¨ to prevent feedback
when hanging up.
Changing Handsfree for a telephone
. The telephone's internal microphone and speaker
TRANSFER
on page 121.
or
on page
P0911589 Issue 03