Using Saved Number Redial; Saving A Number - Nortel Enterprise Edge 2.0 Manual

Displays
01:9___
CANCL BKSP
Enter digits
QUIT
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT
Select a line
Unknown number
For other displays, see

Using Saved Number Redial

Äßà
You can save the number of the external call you are on (provided you dialed the
call) so that you can call it again later. Each telephone can save one number at a time
with Saved Number Redial, not one number for each line.

Saving a number

Äßà
Press
Saved Number Redial records a maximum of 24 digits.
P0911589 Issue 03
Continue entering the number you want to program.
OK You can change the number by pressing
Ã
. When you finished, press
OK
.
Enter the telephone number you want to program
OK exactly like you were dialing it normally. When you
ú
finished, press
You have entered a code outside the code range
(01-70 for system, 71-94 for personal).
There is no number stored on the speed dial code you
have dialed.
If you want to program a line or line pool selection for
this speed dial number, select the line or line pool. If
not, enter the telephone number exactly like you were
dialing it normally. When you finished, press
ú
.
If you want to program a line or line pool selection for
OK
this speed dial number, select the line or line pool. If
not, enter the telephone number you want to program
exactly like you were dialing it normally. When you
finished, press OK.
There is no line related with the speed dial number you
are trying to use. Select a free external line or line pool
and enter the speed dial feature code again.
The system cannot dial the number stored. Re-
program the number.
Common feature displays
Tip
You can copy a number on an autodial button using Saved Number Redial.
while you are on the call.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Time savers for making calls 41
BKSP
or
ú
OK
or .
on page 121.
or