Choosing A Line Using A Line Button; Line Pools - Nortel M7410 Installation And Maintenance Manual

32 Making calls
Hidden number
Line denied
Line061
TRANSFER
No last number
No line selected
Not in service
On another call
LATER
Restricted call
Ring Again?
YES NO
Select a line
Send message?
YES NO
For other displays, see

Choosing a line using a line button

You have one line button for each line assigned to your telephone. Press the line
button to select the line you want to answer or use to make a call. Having several
line buttons allows you immediate access to more than one line.
The M7100 telephone has two intercom paths which are used instead of line buttons
to answer and make calls. Each M7100 can be assigned two lines. You can press
to switch between two calls, one active and one on hold.
˙

Line pools

A line pool is a group of external lines that can be shared by many telephones. You
can use a line in a line pool to make an external call.
Enterprise Edge Feature Programming Telephone Guide
The last number you dialed or the number you saved
for Saved Number Redial was a speed dial number
that displayed a name rather than the number. The
number is dialed correctly, but you cannot see it.
You have attempted to use someone else's private
line.
Enter the digits of the number you want to dial.
You have not dialed an external telephone number
since the last power interruption or system reset.
Either you have no prime line or your prime line is
busy. Select a line manually before dialing.
You have entered the number of a telephone that is not
in service.
The telephone you have called is on another call.
Press LATER to use the Ring Again or Message
features.
The call you are trying to make has been restricted in
programming. A possible reason is time-of-day
restrictions on certain calls.
Press YES to use Ring Again. Press
message. See Sending messages
EXIT
Turning on Ring Again
Either you have no prime line, or the prime line is in
use, or the line programmed for an autodial number,
speed dial number, or Hotline is in use. Select a line
and dial again.
Press YES to send a message. See Messages.
Common feature displays
NO to send a
on page 61 and
on page 36.
on page 125.
P0908510 Issue 02