Passwords.page - Extron electronics CrossPoint 450 Plus Series User Manual

HTML Operation, cont'd
Passwords page
Access the Passwords page (figure 6-6) by clicking the Passwords link on the
System Settings page.
System Settings
Refresh
Email Settings
Firmware Upgrade
Figure 6-6 — Passwords page
The fields on the Passwords page are for entering and verifying administrator and
user passwords. Passwords are case sensitive and are limited to up to 12 upper-
case and lower-case alphanumeric characters. Each password must be entered
twice; once in the Password field and then again in the Re-enter Password field.
Characters in these fields are masked by asterisks (*****). If you do not want
to password protect an access level, leave the Password field and the Re-Enter
password field blank. After entering the desired password in both fields, click the
Submit button.
N An administrator password must be created before a user password can be
To clear an existing password so that no password is required, clear any existing
password, enter a single space character in the Password and Re-enter Password
fields, and click the Submit button.
6-8 CrossPoint / MAV Matrix Switchers • HTML Operation
created.