Configure Gvrp; Related Configuration Tasks - Dell S3048-ON Configuration Manual

• Configure GVRP Registration
• Configure a GARP Timer
• RPM Redundancy

Configure GVRP

To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP configuration is per interface on a switch-by-switch
basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following example, GVRP
is configured on VLAN trunk ports.
Figure 33. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1 Enabling GVRP Globally
2 Enabling GVRP on a Layer 2 Interface

Related Configuration Tasks

• Configure GVRP Registration
• Configure a GARP Timer
284 GARP VLAN Registration Protocol (GVRP)