Local/Remote Switch Cover - Siemens SINAMICS G110D Operating Instructions Manual

9. The ASi-controller will automatically recognize the new slave nodes and assign them an
10. If required, manually download a valid parameter set.
7.3

Local/remote switch cover

Overview
Safety functions
The local/remote switch does not perform any safety function in accordance with the EU
Machinery Directive (98/37/EC).
The local/remote switch cover has been designed to enable the user to take control of the
Inverter and motor from the automated system. In the local mode, the user can precisely
control the movement of the motor, for example, starting, stopping and inching the motor
when fitting a new belt to a conveyor section.
The switch cover is an optional extra and can be ordered using the following order number:
6SL3555-0PL00-2AA0
The layout of the switch cover is shown in the figure below.
Figure 7-1
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
appropriate address.
– The Inverter contains two slave nodes, one is visible to the network, the other is
hidden. When the first node is assigned an address, the second node becomes visible
to the network. The second node is then assigned an appropriate address.
WARNING
Local/remote switch cover layout
Service and maintenance
7.3 Local/remote switch cover
171