Flying Restart - Siemens SINAMICS G110D Operating Instructions Manual

Automatic restart characteristics
Table 6- 44 Overview of the automatic restart characteristics
P1210 ON command always active (continuously)
Fault F0003 due to
Power
failure
0 --*
1 Fault
acknowledgeme
nt
2 Fault
acknowledgeme
nt + restart
3 Fault
acknowledgeme
nt + restart
4 Fault
acknowledgeme
nt + restart
5 Fault
acknowledgeme
nt + restart
6 Fault
acknowledgeme
nt + restart
*) -- = no action
6.9.3.2

Flying restart

Description
CAUTION
Parameter P1215
If the parameter P1215 is active, that is, P1215=1 then the flying restart function will not
work. P1215 must be disabled (P1215=0) to ensure that the flying restart function operates
correctly.
The "flying restart" function, which is activated by P1200, allows the inverter to be switched
to a rotating motor. The function must be used whenever a motor may still be running. This
could be:
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
All other faults
Line supply Before
undervoltage power failure
--*
--* Fault
acknowledgeme
nt
--*
Fault Fault
acknowledgement acknowledgeme
+ restart nt + restart
Fault
acknowledgement
+ restart
--* Fault
acknowledgeme
nt + restart
Fault Fault
acknowledgement acknowledgeme
+ restart nt + restart
in
operation
--* --*
--*
--* --*
Fault
acknowledgeme
nt + restart
--* --*
--*
Fault
acknowledgeme
nt + restart
6.9 Technological functions
ON command in the de-energized
state
Inverter Inverter ready
signals a fault
Before power
Before power failure
failure
--*
Fault
acknowledgement
--* Restart
Fault
acknowledgement
+ restart
--*
Fault Restart
acknowledgement
+ restart
Fault Restart
acknowledgement
+ restart
Functions
--*
--*
--*
--*
125