Note
Time it takes to save the data
It can take several minutes to transfer data to the SD/MMC memory card.
Transferring the parameters from the SD/MMC memory card into the frequency inverter (download)
Parameter
P0003 = 3
P0010 = 30
P0803 = 2
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
Description
3: Access level 3
30: Parameter transfer
2: Start data transfer from the SD/MMC to the EEPROM in the CU. "RDY" LED
flashes.
If the upload procedure is successful, P0010 and P0803 are set to 0 and the "RDY"
•
LED lights up.
If the download procedure is unsuccessful, F0061 or F0062 is displayed and the
•
LED "SF" (red) lights up. In this case, make another attempt to transfer data.
Commissioning
5.9 Backup data and storage
77