Siemens SINAMICS G110D Operating Instructions Manual page 57

Commissioning procedure
Once STARTER is running it will present an empty screen - from the File menu selected new
project.
Figure 5-3
Click OK and the dialog disappears and the normal STARTER screen appears with the
project name appears in the project tree on the right-hand side of the screen.
Figure 5-4
Double-click the "Insert single drive unit"; the select drive dialog appears.
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
Create new project dialog
Insert drive
Commissioning
5.6 Commissioning with STARTER
57