Setpoint Preparation; Overview Of Setpoint Preparation; Minimum Frequency And Maximum Frequency - Siemens SINAMICS G110D Operating Instructions Manual

Functions

6.6 Setpoint preparation

6.6 Setpoint preparation
6.6.1

Overview of setpoint preparation

Overview of setpoint calculation
The setpoint calculation modifies the speed setpoint, e.g. it limits the setpoint to a maximum
and minimum value and using the ramp-function generator prevents the motor from
executing speed steps.
Figure 6-8
6.6.2

Minimum frequency and maximum frequency

Limiting the speed setpoint
The speed setpoint is limited by both the minimum and maximum frequency.
Minimum frequency
When the motor is switched on, it accelerates to the minimum frequency regardless of the
frequency setpoint. The set parameter value applies to both directions of rotation. In addition
to its limiting role, the minimum frequency can be used as a reference value for various
monitoring functions (e.g. if a motor holding brake is engaged when the minimum frequency
is reached).
Maximum frequency
The frequency setpoint is limited to the maximum frequency in both directions of rotation. A
message is output if the maximum frequency is exceeded.
The maximum frequency also acts as an important reference value for various inverter
functions (e.g. the ramp-function generator).
100
Setpoint calculation in the inverter
Operating Instructions, 2009-05-15, A5E02385577A AB
SINAMICS G110D