Siemens SINAMICS G110D Operating Instructions Manual page 151

Hide thumbs Also See for SINAMICS G110D:
Table of Contents

Advertisement

Error code
Description
200
Modified lower limit exceeded.
201
Modified upper limit exceeded.
202
No display on the operator panel. Parameter must be hidden on the operator panel.
203
No display on the operator panel. Parameter must be hidden on the operator panel.
204
The available access authorization (i.e. level) does not cover modification of
parameter (similar to 11 but used in combination with the secret password
parameter).
210 - 214
Operator panel error codes;
210 = insufficient storage space in operator panel
211 = storage block cannot be found
212 = invalid block type for operation
213 = error in command arguments
214 = special operation failed
300
Array elements differ.
IND components
The IND word contains two pieces of information. The first is the page number of the
parameter to be accessed. The page is stored in bits 10-15 of the IND word in reverse
format, i.e. bit 15 is the least significant bit of the page number. As an example, consider the
following:
Parameter 3900:3900 = 1 x 2000 + 1900PP = binary 100000 = 1 PNU = 1900
Parameter 4100:4100 = 2 x 2000 + 100PP = binary 010000 = 2 PNU = 100
Figure 6-35
The other part of the IND word is the parameter index. For tasks involving arrays, this byte
determines the part of the array to be accessed as shown below.
Table 6- 59
Parameter index
0 ≤ IDX ≤ 254
IDX = 255
PWE components
The PWE part of the PKW message contains the parameter data. If the current PKW transfer
requires no parameter data the PKE may be of zero length, otherwise it is arranged as one
or more words. Data of length shorter than that available is packed in the PKE as shown in
the figure below. When a complete array is transferred the format below is repeated as many
times as required.
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
IND component structure
IND parameter index
6.11 Operation in fieldbus systems
Action
Access element IDX
Access entire array
Functions
Errors set by task
2, 3, 7, 8 or 11 to 15
2, 3, 7, 8 or 11 to 15
1 to 15
1 to 15
1 to 15
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents