Functions
6.9 Technological functions
● Motor and inverter protection
● Technological functions
The associated parameters are indexed (index 0, 1 or 2). Control commands select one of
the three indices and therefore one of the three saved settings.
This means, that as described in the example above, you can switch over all of the settings
of the inverter matching the particular motor.
All of the switchable parameters of the five functions mentioned above with the same index
is known as a "command data set".
Figure 6-15
Drive Data Sets switchover in Inverter
130
(Exception: Technology controller, brake control, automatic restart and unassigned
function blocks)
Operating Instructions, 2009-05-15, A5E02385577A AB
SINAMICS G110D