Display Ospfv3 Non-Stop-Routing - HP 5920 Series Command Reference Manual

Table 118 Command output
Field
Nexthop
Interface
RefCount
Status
NbrId
NbrIntID

display ospfv3 non-stop-routing

Use display ospfv3 non-stop-routing to display OSPFv3 NSR information.
NOTE:
This command is available in Release 2311P04 and later versions.
Syntax
display ospfv3 [ process-id ] non-stop-routing
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays OSPFv3 status information for all OSPFv3 processes.
Examples
# Display OSPFv3 NSR information for all OSPFv3 processes.
<Sysname> display ospfv3 non-stop-routing
Nonstop Routing capability: Enabled
Upgrade phase
Table 119 Command output
Field
Nonstop Routing
capability
Description
Next hop address.
Output interface.
Reference count (routes that reference the next hop).
Next hop status: valid or invalid.
Neighbor router ID.
Neighbor interface ID.
OSPFv3 Process 1 with Router ID 3.3.3.3
: Normal
Description
NSR status: enabled or disabled.
468