HP 5920 Series Command Reference Manual page 58

network-operator
Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed static route next hop information. Without this keyword, the command
displays brief static route next hop information.
Examples
# Display brief static route next hop information.
<Sysname> display route-static nib
Total number of nexthop(s): 44
NibID: 0x11000000
Type: 0x21
UserKey0: 0x111
UserKey1: 0x0
IFIndex: 0x111
NibID: 0x11000001
Type: 0x41
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x0
...
Table 16 Command output
Field
NibID
NibSeq
Type
Flushed
UserKey0
UserKey1
VrfNthp
Nexthop
IFIndex
LocalAddr
# Display detailed static route next hop information.
<Sysname> display route-static nib verbose
Total number of nexthop(s): 44
NibID: 0x11000000
Type: 0x21
Sequence: 0
Flushed: Yes
VrfNthp: 0
Nexthop: 0.0.0.0
LocalAddr: 0.0.0.0
Sequence: 1
Flushed: Yes
VrfNthp: 5
Nexthop: 2.2.2.2
LocalAddr: 0.0.0.0
Description
ID of the NIB.
Sequence number of the NIB.
Type of the NIB.
Indicates whether the route with the NIB has been flushed to the
FIB.
Reserved data 1.
Reserved data 2.
VPN instance to which the next hop belongs.
Next hop address.
Interface index
Local interface address.
Sequence: 0
Flushed: Yes
45