Display Ip Policy-Based-Route Local - HP 5920 Series Command Reference Manual

Layer 3 - ip routing
Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Total matched: 0
Table 94 Command output
Field
Policy based routing information for
interface Vlan-interface1(failed)
node 0 deny(not support)
node 2 permit(no resource)
if-match acl
apply next-hop
apply output-interface
Vlan-interface2 track 1 (down)
Matched: 0 (no statistics resource)
Total matched
Related commands
reset ip policy-based-route statistics

display ip policy-based-route local

Use display ip policy-based-route local to display local PBR configuration and statistics.
Syntax
display ip policy-based-route local [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
Description
PBR configuration and statistics on VLAN-interface 1.
failed indicates that the policy (including all its nodes) failed to be
assigned to the driver.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), failed can be displayed only when you
specify the slot slot-number option for the command.
Match mode of the node, permit or deny.
not support means the device does not support match criteria configured
on the node. no resource means the device has insufficient ACL
resources, and failed to assign ACL resources to the node.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), not support and no resource can be
displayed only when you specify the slot slot-number option for the
command.
Matches packets against the ACL.
Specify a next hop for permitted packets.
Specify an output interface for permitted packets. The interface status
includes the following:
up—The interface is up.
down—The interface is down at network layer.
inactive—The interface is not in position.
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), no statistics resource can be displayed only
when you specify the slot slot-number option for the command.
Total number of successful matches on all nodes.
405

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents