Display Ip Routing-Table Protocol - HP 5920 Series Command Reference Manual

# Display brief information about the active route permitted by the IP prefix list.
[Sysname] display ip routing-table prefix-list test
Routes Matched by Prefix list : test
Summary Count : 1
Destination/Mask
1.1.1.0/24
For command output, see
# Display detailed information about all routes permitted by the IP prefix list.
[Sysname] display ip routing-table prefix-list test verbose
Routes Matched by Prefix list : test
Summary Count : 1
Destination: 1.1.1.0/24
Protocol: Direct
SubProtID: 0x1
Cost: 0
Tag: 0
OrigTblID: 0x0
TableID: 0x2
NibID: 0x10000003
AttrID: 0xffffffff
Flags: 0x1008c
Label: NULL
BkLabel: NULL
Tunnel ID: Invalid
BkTunnel ID: Invalid
For command output, see

display ip routing-table protocol

Use display ip routing-table protocol to display information about routes installed by a protocol.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies MPLS L3VPN instance by its name, a case-sensitive string of
1 to 31 characters. Without this option, the command displays routing information for the public network.
Proto Pre Cost
Direct 0 0
Table 1.
Process ID: 0
Age: 04h20m37s
Preference: 0
State: Active Adv
OrigVrf: default-vrf
OrigAs: 0
LastAs: 0
Neighbor: 0.0.0.0
OrigNextHop: 1.1.1.2
RealNextHop: 1.1.1.2
BkNextHop: N/A
Interface: Vlan-interface2
BkInterface: N/A
Table 2.
11
NextHop Interface
1.1.1.2 Vlan2