HP 5920 Series Command Reference Manual page 51

Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed next hop information for direct routes. Without this keyword, the command
displays brief next hop information for direct routes.
Examples
# Display brief next hop information for direct routes.
<Sysname> display route-direct nib
Total number of nexthop(s): 116
NibID: 0x10000000
Type: 0x1
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x111
NibID: 0x10000001
Type: 0x1
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x112
...
Table 14 Command output
Field
NibID
Sequence
Type
Flushed
UserKey0
UserKey1
VrfNthp
Nexthop
IFIndex
# Display detailed next hop information for direct routes.
<Sysname> display route-direct nib verbose
Total number of nexthop(s): 116
NibID: 0x10000000
Type: 0x1
UserKey0: 0x0
UserKey1: 0x0
IFIndex: 0x111
Sequence: 0
Flushed: Yes
VrfNthp: 1
Nexthop: 0.0.0.0
LocalAddr: 0.0.0.0
Sequence: 1
Flushed: Yes
VrfNthp: 1
Nexthop: 127.0.0.1
LocalAddr: 127.0.0.1
Description
ID of the NIB.
Sequence number of the NIB.
Type of the NIB.
Indicates whether the route with the NIB has been flushed to the FIB.
Reserved data 1.
Reserved data 2.
VPN to which the next hop belongs.
Next hop address.
Interface index.
Sequence: 0
Flushed: Yes
VrfNthp: 1
Nexthop: 0.0.0.0
LocalAddr: 0.0.0.0
38