Display Ipv6 Policy-Based-Route; Display Ipv6 Policy-Based-Route Interface - HP 5920 Series Command Reference Manual

display ipv6 policy-based-route

Use display ipv6 policy-based-route to display IPv6 PBR policy information.
Syntax
display ipv6 policy-based-route [ policy policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
Usage guidelines
If no policy is specified, this command displays information about all policies. If a policy name is
specified, this command displays information about the specified policy.
Examples
# Display all IPv6 policy information.
<Sysname> display ipv6 policy-based-route
Policy name: aaa
node 1 permit:
if-match acl 2000
apply next-hop 1000::1
Table 135 Command output
Field
node 1 permit
if-match acl
apply next-hop
Related commands
ipv6 policy-based-route (system view)

display ipv6 policy-based-route interface

Use display ipv6 policy-based-route interface to display IPv6 interface PBR configuration and statistics.
Syntax
display ipv6 policy-based-route interface interface-type interface-number [ slot slot-number ]
Views
Any view
Description
The match mode of Node 1 is permit.
Matches IPv6 packets against IPv6 ACL.
Specify a next hop for permitted IPv6 packets.
543