Display Bgp Routing-Table Dampened Ipv4 Unicast - HP 5920 Series Command Reference Manual

Field
IPsec profile name
Routing policy configured
# Display log information for BGP IPv4 unicast peer 81.2.1.1 for the public network.
<Sysname>display bgp peer ipv4 81.2.1.1 log-info
Peer: 81.2.1.1
Date
20-May-2014 16:37:38 Down
20-May-2014 16:37:33 Up
20-May-2014 16:37:22 Down
20-May-2014 16:37:04 Up
Table 77 Command output
Field
Peer
Date
Time
State
Notification
Error/SubError

display bgp routing-table dampened ipv4 unicast

Use display bgp routing-table dampened ipv4 unicast to display dampened BGP IPv4 unicast routes.
Syntax
display bgp routing-table dampened ipv4 [ unicast ] [ vpn-instance vpn-instance-name ]
Description
IPsec profile applied to the IPv6 BGP peer.
This field is available only for the IPv6 unicast and IPv6 multicast
address families.
Routing policy configured for the peer.
If no routing policy is specified, this field displays No routing policy is
configured.
Time State Notification
Error/SubError
Send notification with error 3/5
UPDATE Message Error/Attribute Length Error
<ORIGIN attribute length error>
Send notification with error 3/11
UPDATE Message Error/Malformed AS_PATH
<malformed AS_PATH>
Description
IP or IPv6 address of the peer.
Date on which the Notification was sent or received.
Time at which the Notification was sent or received.
BGP session state:
•
Up—The BGP session is established.
•
Down—The BGP session is down.
Error code of the Notification, indicating the reason why the BGP session was down.
•
Error—Refers to the error code, which identifies the type of the Notification.
•
SubError—Refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
293