Display Ripng - HP 5920 Series Command Reference Manual

Predefined user roles
network-admin
Parameters
value: Specifies a default metric for redistributed routes, in the range of 0 to 16.
Usage guidelines
When you use the import-route command to redistribute routes from another routing protocol without
specifying a metric, the metric specified by the default cost command applies.
Examples
# Configure a default metric of 2 for redistributed routes.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] default cost 2
Related commands
import-route

display ripng

Use display ripng to display state and configuration information for a RIPng process.
Syntax
display ripng [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. If no process is specified, this
command displays information about all RIPng processes.
Examples
# Display state and configuration information for all configured RIPng processes.
<Sysname> display ripng
Public VPN-instance name:
RIPng process: 1
Preference: 100
Checkzero: Enabled
Default cost: 0
Maximum number of load balanced routes: 6
Update time
Suppress time :
Number of periodic updates sent: 256
Routing policy: abc
: 30 secs
120 secs
Timeout time
Garbage-collect time :
420
: 180 secs
120 secs