Display Ip As-Path - HP 5920 Series Command Reference Manual

Views
Routing policy node view
Predefined user roles
network-admin
Parameters
node-number: Specifies the routing policy node number in the range of 0 to 65535.
Usage guidelines
The specified next node must have a larger number than the current node.
Example
# Specify the next node 20 for node 10 of routing policy policy1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] continue 20

display ip as-path

Use display ip as-path to display BGP AS path list information.
Syntax
display ip as-path [ as-path-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
as-path-number: Specifies an AS path list by its number in the range of 1 to 256. Without this argument,
the command displays information about all BGP AS path lists.
Examples
# Display information about BGP AS path list 1.
<Sysname> display ip as-path 1
ListID
1
Table 139 Command output
Field
ListID
Mode
Expression
Mode Expression
permit 2
Description
AS path list ID.
Match mode:
•
permit.
•
deny.
Regular expression used to match routes.
561