Isis Bfd Enable; Isis Circuit-Level - HP 5920 Series Command Reference Manual

Examples
# On VLAN-interface 10, configure the authentication mode as simple, and set the plaintext password
to 123456.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis authentication-mode simple plain 123456
Related commands
area-authentication-mode
•
domain authentication-mode
•

isis bfd enable

Use isis bfd enable to enable BFD.
Use undo isis bfd enable to disable BFD.
Syntax
isis bfd enable
undo isis bfd enable
Default
IS-IS BFD is disabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable BFD for IS-IS on VLAN-interface 1 1.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] isis enable
[Sysname-Vlan-interface11] isis bfd enable

isis circuit-level

Use isis circuit-level to set the circuit level for the interface.
Use undo isis circuit-level to restore the default.
Syntax
isis circuit-level [ level-1 | level-1-2 | level-2 ]
undo isis circuit-level
Default
An interface can establish either the Level- 1 or Level-2 adjacency.
232