Display Isis Redistribute - HP 5920 Series Command Reference Manual

display isis redistribute

Use display isis redistribute to display the redistributed IS-IS routing information.
Syntax
display isis redistribute [ ipv4 [ ip-address mask-length ] ] [ level-1 | level-2 ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Displays the redistributed IPv4 routing information (the default).
ip-address mask-length: Specifies the destination IP address and mask length.
process-id: Specifies the IS-IS process by its ID in the range of 1 to 65535.
level-1: Displays the IS-IS Level- 1 routing information.
level-2: Displays the IS-IS Level-2 routing information.
Usage guidelines
If no IS-IS level is specified, this command displays both Level- 1 and Level-2 routing information.
Examples
# Display redistributed IPv4 routing information.
<Sysname> display isis redistribute 1
Type IPv4 Destination
--------------------------------------------------------------------------------
D 192.168.30.0/24
D 11.11.11.11/32
D 10.10.10.0/24
Table 62 Command output
Field
Route information for IS-IS(1)
Level-1 IPv4 Redistribute Table
Level-2 IPv4 Redistribute Table
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Redistribute Table
--------------------------------
IntCost ExtCost
0 0
0 0
0 0
203
Tag State
Active
Description
IS-IS process of the redistributed routing information.
Redistributed IPv4 routing information of IS-IS Level-1.
Redistributed IPv4 routing information of IS-IS Level-2.