HP 5920 Series Command Reference Manual page 473

Area up interface count: 0
Table 112 Command output
Field
Area
Area flag
7/5 translator state
7/5 translate stability timer interval
Area up interface count
Interface
Restarter state
State
Type
Neighbor count of this interface
Neighbor
GR state
Last helper exit reason
Virtual-link Neighbor-ID
Neighbor-State
Local IPv6 address
Remote IPv6 address
Transit area
Sham-link Neighbor-ID
Description
Area ID.
Type of the area:
•
Normal.
•
Transit.
•
Stub.
•
StubNoSummary—Totally stub area.
•
NSSA.
•
NSSANoSummary—Totally NSSA area.
•
NSSANoSummaryNoImportRoute—Totally NSSA
area with the no-import-route keyword configured.
State of the translator that translates Type-7 LSAs to Type-5
LSAs:
•
Enabled—The translator is specified through
commands.
•
Elected—The translator is designated through election.
•
Disabled—The device is not a translator.
Stability interval (in seconds) for Type-7 LSA-to-Type-5 LSA
translation.
Number of up interfaces in the area.
Interface in the area, or the output interface of the virtual
link.
Restarter state on the interface.
Interface state.
Interface network type.
Number of neighbors on the interface.
Neighbor router ID.
Neighbor GR state:
•
Normal—GR is not in progress or has completed.
•
Under GR—GR is in process.
•
Under Helper—The process is acting as GR helper.
Reason that the helper exited most recently.
Router ID of the virtual link's neighbor.
Neighbor or virtual link state: Down, Init, 2-Way, ExStart,
Exchange, Loading, and Full.
Local IPv6 address of the neighbor relationship.
Peer IPv6 address of the neighbor relationship.
Transit area ID.
Router ID of the sham link's neighbor.
460