Display Ospf Vlink - HP 5920 Series Command Reference Manual

Field
HELLO: Hello-time mismatch
HELLO: Dead-time mismatch
HELLO: Ebit option mismatch
DD: MTU option mismatch
DD: Unknown LSA type
DD: Ebit option mismatch
ACK: Bad ack
ACK: Unknown LSA type
REQ: Empty request
REQ: Bad request
UPD: LSA checksum bad
UPD: Unknown LSA type
UPD: Less recent LSA

display ospf vlink

Use display ospf vlink to display OSPF virtual link information.
Syntax
display ospf [ process-id ] vlink [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays the OSPF virtual link information for all OSPF processes.
standby slot slot-number: Displays backup OSPF virtual link information for an IRF member device.
Without this option, the command displays OSPF virtual link information.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
Virtual-link Neighbor-ID
Interface: 10.1.2.1 (Vlan-interface1)
Cost: 1562
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
-> 2.2.2.2, Neighbor-State: Full
State: P-2-P Type: Virtual
Description
Hello packets with mismatched hello timer.
Hello packets with mismatched dead timer.
Hello packets with mismatched E-bit in the option field.
DD packets with mismatched MTU.
DD packets with unknown LSA type.
DD packets with mismatched E-bit in the option field.
Bad LSAck packets for LSU packets.
LSAck packets with unknown LSA type.
LSR packets with no request information.
Bad LSR packets.
LSU packets with wrong LSA checksum.
LSU packets with unknown LSA type.
LSU packets without the most recent LSA.
135