HP 5920 Series Command Reference Manual page 112

Field
RouterID
Router type
Route tag
Multi-VPN-Instance is not enabled
Opaque capable
Originating router-LSAs with maximum
metric
Condition
State
SPF-schedule-interval
LSA generation interval
LSA arrival interval
Transmit pacing
Default ASE Parameter
Route preference
ASE route preference
SPF computation count
RFC1583 compatible
SNMP trap rate limit interval
Count
ExChange/Loading neighbors
Full neighbors
Description
Router ID.
Router type:
•
ABR.
•
ASBR.
•
NSSA.
•
Null.
Tag of redistributed routes.
The OSPF process does not support multi-VPN-instance.
Opaque LSA advertisement and reception capability is
enabled.
The maximum cost value for router LSAs (excluding stub links) is
used.
Status of the stub router:
•
Always.
•
On startup while BGP is converging.
•
On startup while BGP is converging for XXX seconds.
•
On startup for XXX seconds.
Indicates whether the stub router is active.
Interval for SPF calculations.
LSA generation interval.
LSA arrival interval.
LSU packet transmit rate of the interface:
•
Interval—LSU transmit interval of the interface.
•
Count—Maximum number of LSU packets sent each time.
Default ASE Parameters: metric, tag, route type.
Internal route preference.
External route preference.
SPF computation count of the OSPF process.
Compatible with RFC 1583.
SNMP notification sending interval.
Number of sent SNMP notifications.
Neighbors in ExChange/Loading state.
Neighbors in Full state.
99