Display Isis Route Ipv6 - HP 5920 Series Command Reference Manual

IntCost
State
Table 131 Command output
Field
Route information for IS-IS(1)
Level-1 IPv6 Redistribute Table
Level-2 IPv6 Redistribute Table
Type
Destination
IntCost
ExtCost
Tag
State

display isis route ipv6

Use display isis route ipv6 to display IPv6 IS-IS route information.
Syntax
display isis route ipv6 [ ipv6-address ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Displays IPv6 IS-IS route information with the specified IPv6 destination address.
level-1: Displays Level- 1 IPv6 IS-IS route information.
level-2: Displays Level-2 IPv6 IS-IS route information.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
Usage guidelines
If no level is specified, this command displays both Level- 1 and Level-2 route information.
: 0 Tag
: Active
:
Description
Redistributed route information for IS-IS process 1.
Redistributed route information of IS-IS Level-1.
Redistributed route information of IS-IS Level-2.
Redistributed route types:
•
Direct.
•
IS-ISv6.
•
Static.
•
OSPFv3.
•
BGP4+.
•
RIPng.
IPv6 destination address.
Internal route cost.
External route cost.
Tag value.
Indicates whether the redistributed route is valid.
521