HP 5920 Series Command Reference Manual page 115

Field
Reset phase of module
7/5 translator state
7/5 translate stability timer interval
ExChange/Loading Neighbors
Area
Description
Reset phase of each module:
•
Main control module:
N/A—Not reset.
Delete area.
Delete process.
•
Neighbor maintenance (P) module:
N/A—Not reset.
Delete neighbor.
Delete interface.
Delete vlink—Delete virtual link.
Delete shamlink—Delete sham link.
•
LSDB synchronization (L) module:
N/A—Not reset.
Stop timer.
Delete ASE—Delete all ASE LSAs.
Delete ASE maps—Delete ASE LSA maps.
Clear process data.
Delete area LSA—Delete LSAs and maps from an area.
Delete area interface—Delete interfaces from an area.
Delete process—Delete process-related resources.
Restart—Restart process-related resources.
•
Route calculation (C) module:
N/A—Not reset.
Delete topology—Delete area topology.
Delete router—Delete routes of routers.
Delete intra AS—Delete intra-AS routes
Delete inter AS—Delete AS-external routes.
Delete forward address—Delete forwarding address list.
Delete advertise—Delete advertising router list.
•
Route redistribution (R) module:
N/A—Not reset.
Delete ABR summary—Delete summary routes of the
ABR.
Delete ASBR summary—Delete summary routes of the
ASBR.
Delete import—Delete redistributed routes.
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
•
Enabled—The translator is specified through commands.
•
Elected—The translator is designated through election.
•
Disabled—The device is not a translator.
Stability interval for Type-7 LSA-to-Type-5 LSA translation.
Neighbors in ExChange/Loading state.
Area ID in the IP address format.
102