Display Ip Prefix-List - HP 5920 Series Command Reference Manual

[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply ip-address next-hop 193.1.1.8

display ip prefix-list

Use display ip prefix-list to display IPv4 prefix list statistics.
Syntax
display ip prefix-list [ name prefix-list-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command displays statistics for all IPv4 prefix lists.
Examples
# Display the statistics for IPv4 prefix list abc.
<Sysname> display ip prefix-list name abc
Prefix-list: abc
Permitted 0
Denied 0
index: 10
Table 143 Command output
Field
Prefix-list
Permitted
Denied
index
deny
6.6.6.0/24
ge
le
Related commands
ip prefix-list
•
reset ip prefix-list
•
deny 6.6.6.0/24
Description
Name of the IPv4 prefix list.
Number of routes matching the criterion.
Number of routes not matching the criterion.
Index of an item.
Match mode of the item:
•
permit.
•
deny.
IP address and mask.
Greater-equal, the lower mask length.
Less-equal, the upper mask length.
576
ge 26 le 28