Siemens SIPROTEC Manual page 576

Technical Data
4.1 General
System Interface (optional)
RS232/RS485/FO
Profibus FMS RS485/Profibus FMS FO
Profibus DP RS485/Profibus DP FO
DNP 3.0 RS485
DNP 3.0 FO
Ethernet EN100
acc. to version ordered
RS232
RS485
Optical fibre cable (FO)
576
Connection for panel flush mounting
Housing
Connection for surface-mounting housing
../CC and higher in console housing
Test voltage
Transmission rate
Transmission distance
Connection for panel flush mounting
Housing
Connection for surface-mounting housing
../CC and higher in console housing
Test voltage
Transmission rate
Transmission distance
FO connector type
Connection for panel flush-mounting
housing
Connection for surface-mounting housing at the bottom side of the console housing
optical wavelength
Laser class 1 according to EN 60825-1/-2 when using glass fiber 50 μm / 125 µm or
Permissible optical signal attenuation
Transmission distance
Character idle state
isolated interface
for data transfer to a control centre
rear panel, slot „B",
9-pole D-subminiature female connector
up to ../BB at two-tier terminal on the housing bottom
at the case bottom
9-pole D-subminiature female connector
500 V; 50 Hz
min. 4800 baud; max. 38400 baud
Factory setting 19200 Baud
max. 15 m
rear panel, slot „B",
9-pole D-subminiature female connector
up to ../BB at the two-tier terminal
at the case bottom
at the case bottom
9-pole D-subminiature female connector
500 V; 50 Hz
min. 4800 baud; max. 38 400 baud;
Factory setting 19 200 baud
max. 1 km
ST connector
rear panel, slot „B"
λ = 820 nm
when using glass fibre 62.5 μm / 125 µm
max. 8 dB, with glass fibre 62.5 μm / 125 µm
max. 1.5 km
selectable, factory setting „Light off"
C53000-G1176-C169-5, Release date 02.2011
SIPROTEC, 7SD5, Manual