Siemens SIPROTEC Manual page 43

Addr. Parameter
124 HS/SOTF-O/C
125 Weak Infeed
126 Back-Up O/C
130 Sens. Earth Flt
131 Earth Fault O/C
132 Teleprot. E/F
133 Auto Reclose
134 AR control mode
135 Synchro-Check
136 FREQUENCY Prot.
137 U/O VOLTAGE
138 Fault Locator
139 BREAKER FAILURE
140 Trip Cir. Sup.
141 REF PROT.
SIPROTEC, 7SD5, Manual
C53000-G1176-C169-5, Release date 02.2011
Setting Options
Disabled
Enabled
Disabled
Enabled
Logic no. 2
Disabled
TOC IEC
TOC ANSI
Disabled
Enabled
Disabled
TOC IEC
TOC ANSI
TOC Logarithm.
Definite Time
U0 inverse
Sr inverse
Dir.Comp.Pickup
UNBLOCKING
BLOCKING
Disabled
1 AR-cycle
2 AR-cycles
3 AR-cycles
4 AR-cycles
5 AR-cycles
6 AR-cycles
7 AR-cycles
8 AR-cycles
ADT
Disabled
Pickup w/ Tact
Pickup w/o Tact
Trip w/ Tact
Trip w/o Tact
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Enabl. w. comp.
Disabled
Enabled
with BCD-output
Disabled
Enabled
enabled w/ 3I0>
Disabled
1 trip circuit
2 trip circuits
3 trip circuits
Disabled
Enabled
Default Setting
Disabled Instantaneous HighSpeed/SOTF
Overcurrent
Disabled Weak Infeed (Trip and/or Echo)
TOC IEC Backup overcurrent
Disabled Sensitive Earth Flt.(comp/ isol.
starp.)
Disabled Earth fault overcurrent
Disabled Teleprotection for Earth fault over-
curr.
Disabled Auto-Reclose Function
Trip w/o Tact Auto-Reclose control mode
Disabled Synchronism and Voltage Check
Disabled Over / Underfrequency Protection
Disabled Under / Overvoltage Protection
Disabled Fault Locator
Disabled Breaker Failure Protection
Disabled Trip Circuit Supervision
Disabled Restricted earth fault protection
Functions
2.1 General
Comments
43