Lcd Backlight Replacement; Tools Required; Removal Procedure; Replacement Procedure - Agilent Technologies E5052A Service Manual

LCD Backlight Replacement

Tools Required

• TORX screwdriver, T10, T15, and T20
• Open-end torque wrench, 5/16 inch (set to 10 in-lb) (for reconnecting SMA connector)
• Flat edge screwdriver

Removal Procedure

Refer to Figure 6-28 for this procedure.
Step 1. Remove the LCD as described in"A51 LCD Replacement" on page 215.
Step 2. Push the stopper (item 1) and slide the backlight as shown in Figure 6-28.
Figure 6-28 LCD Backlight Removal

Replacement Procedure

Step 1. Reverse the order of the removal procedure.
Chapter 6
Replacement Procedure
LCD Backlight Replacement
217